Features

Measuring principle: Magnetic induction (F-probe) and eddy current (N-probe).

Two measure mode: Single and Continuous.

Two group mode: direct (DIR) and general (GEN), readings will be saved when power off in general mode, and not in direct mode.

Data Group: One direct group (readings not be stored to memory), four general group (readings can be stored], and each group have individual statistics, alarm settings and calibration.80 readings can be stored for each group.

Zero point calibration and multi-point calibration (up to 4 points) for each group.

Alarm: Set higher and lower alarm range for measuring.

Statistics: mean, minimum, maximum and standard deviation.

Three probe modes: auto, magnetic and eddy current.

Auto Power-Off.

Battery: Low battery indication.

Model	NTCI2000
Display	128 x 128mm dot matrix LCD
Units	μm,mm and mils
Measuring Range	0 to 1300µm [0 to 51.2mils]
Accuracy	±[3% of readings+2μm] [3% of readings+0.078mils]
Resolution	0µm~999µm [1µm], 1000µm~1300µm [0.01mm]; 0mils~39.39mils [0.01mils], 39.4mils~51.2mils [0.1mils]
Min. Curvature Radius	Convex 1.5mm[59mils] & Concave 25mm[984mils]
Min. Measuring Size	Ø6mm[236mils]
Min. Thickness Of Substrate	F-probe: 0.5mm, N-probe: 0.3mm
PC Interface	Download Data via USB Interface
Power Supply	1.5V AAA battery [x2]
Operating Temperature	0°c to 40°c
Storage Temperature	-20°c to 70°c
Dimension	110mm x 53mm x 24mm